Fiber Optic Cable – ADSS

Fiber Optic Cable – ADSS

Description

The ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose

tube made of high modulus plastics. The tubes are filled with a water-resistant filling

compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced

Plastic) as a non-metallic central strength member into a compact and circular

cable core. After the cable core is filled with filling compound. it is covered with thin

PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over

the inner sheath as strength member, the cable is completed with PE or AT

(anti-tracking) outer sheath.

Characteristics

· Can be installed without shutting off the power

· Excellent AT performance, The maximum inductive at the operating point of AT sheath can

reach 25kV

· Light weight and small diameter reducing the load caused by ice and wind and the load on

towers and backprops

· Large span lengths and the largest span is over 1000m

· Good performance of tensile strength and temperature

· The design life span is 30 years

Application

The actual status of overhead power lines is taken into full consideration when ADSS cable is

being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power

lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity

and stranding process can satisfy the demand on various spans.

·Standards

ADSS cable complies with Standard IEEE P 1222 as well as IEC 60794-1.

·Optical Characteristics

· Technical Parameters

SHENZHEN BESKCO TECHNOLOGY LIMITED  Founded in 2009. We are a leading professional manufacturer for FTTH Fiber optic product. BESKCO offers a wide range of telecommunication products and  also has the ability for customerized product according to customers’ needs. We always strive for being the communication systems integrator and optical solution provider leader.